Resin Butterfly Tray
by Mark Montano Follow

Turn a few pieces of wood into a beautiful butterfly tray that's perfect for entertaining or jazzing up your home decor!   Finish with a thick coat of decoupage in high gloss OR resin for a glass like finish.  See the video here:



  • Stuff You'll Need
    Wood for base (size is up to you)
    1 1/2" wood trim for the edges (have them cut to size)
    1" x 1" wood trim for handles (two pieces about 4" long)
    Americana Decoupage in Gloss
    Americana Decor Metallics in Antique Brass
    Americana Satin Enamel in True Teal
    E-6000 Glaze Coat Resin
    Optional: Brass corners
    Spray bottle with water
    Butterfly images
    Hammer and small nails

    6 years ago
  •  Here's How
    1. Nail your tray together using 1" long nails
    2. Sand the edges so they're even and smooth
    3.  Paint the base with Americana Decor Metallics in Antique Brass
    4. Paint the edges and bottom with Americana Decor Satin Enamels in True Teal
    5. Cut out your butterfly images
    6. & 7. Decoupage the butterflies to the base of the tray and let dry
    *Mist each butterfly with a spray bottle to relax the paper to prevent bubbles
    *Finish with a generous coat of decoupage over all of the images and on the inside edges of the tray
    8. Add brass corners (this step is optional but I think it makes the tray look expensive and chic!)
    9. & 10. Nail in the 1" x 1" wood pieces on the sides for handles and then paint in the True Teal
    11.  Mix the Glaze Coat resin and pour evenly in the base of the tray
    *Spread with a sponge brush to help even it out
    12.  Pop the bubbles with a small torch OR long arm lighter and let cure overnight

    6 years ago
  • Ready for afternoon tea!

    6 years ago

Discussion 0


Welcome to Kollabora

Get the best DIY projects, patterns, and inspiration straight to your inbox!